Exclusive Fabrimetrics Pre-Cut Premium Dam Material – 8 ft X 10 ft

Irrigation dams are designed to contain water in irrigation ditches to facilitate flood irrigation. Fabrimetrics’ traditional premium quality irrigation dam material uses only 100% virgin polyethylene resins in both the high-density yarn and the low-density coating. The dam is made without any heat seals. Each pre-cut dam features a 6″ sleeve, sewn with 100% polyester thread using a double-needle chain stitch with 4 to 5 stitches per inch. A pipe or piece of 2×4 can slide into the sleeve, providing something for the dam to drape from into the irrigation ditch. This orange material is 8.5 to 9 Mils thick and 4.1 oz per square yard.